The ATV-SG1 is a compact on-camera shotgun condenser microphone designed for DSLR, mirrorless SLR, and other cameras. A newly designed 14 mm large-diameter diaphragm provides high sensitivity and low noise for natural, high-resolution audio capture. The highly directional 100 mm acoustic tube keeps pickup focused on the sound source while reducing unwanted background noise, and the integrated shock mount dissipates handling noise caused by camera movement and vibrations. Audio-Technica's patented noise-immunity technology provides resistance to hum and RF interference from smartphones and other electronic devices.
A stepless gain adjustment knob on the rear of the unit allows on-the-fly level control, while a low-cut filter switch attenuates low-frequency noise from wind, traffic, and HVAC systems. The safety track feature splits the audio signal, recording the set gain level to the left channel and a -6 dB reduced level to the right channel, helping to ensure a clean, usable recording even in the event of unexpected volume spikes. An external input jack and accessory shoe allow a wireless lavalier receiver or plug-in-powered wired lavalier microphone to be connected for simultaneous shotgun and lavalier recording. A headphone jack with volume adjustment enables real-time monitoring.
The 12-sided shoe mounting plate allows the microphone to be rotated in 30-degree increments for flexible horizontal positioning, and the slide rail allows forward and backward adjustment for versatile placement. The built-in USB rechargeable lithium-ion battery provides up to 24 hours of continuous operation, and the microphone powers on and off automatically with the camera. Designed and manufactured in Japan.
Ideal For
Suited to professional videographers and content creators working with DSLR or mirrorless cameras who require high-resolution on-camera audio with advanced gain control, safety recording, and simultaneous lavalier input capability.
Features
- Fixed-charge back plate permanently polarised condenser element
- 14 mm large-diameter diaphragm for high sensitivity and low noise
- Highly directional 100 mm acoustic tube
- Integrated shock mount to reduce handling noise
- Patented Audio-Technica noise-immunity technology for resistance to RF interference from smartphones and electronic devices
- Low-cut filter switch (160 Hz, 24 dB/octave)
- Stepless gain adjustment knob (37 dB range)
- Safety track mode: set gain level to left channel, -6 dB reduced level to right channel
- External input jack (3.5 mm stereo mini-jack, mixed to mono) for wireless lavalier receiver or plug-in-powered wired lavalier
- Headphone output jack with volume adjustment (minimum 16 ohms impedance)
- 12-sided shoe mounting plate with 30-degree increment rotation
- Slide rail for forward and backward mic positioning
- Additional accessory shoe
- Built-in USB rechargeable lithium-ion battery — up to 24 hours continuous operation
- Charges via USB Type-C (approx. 2.5 hours charge time)
- Powers on/off automatically with the camera
- Includes wind muff, coiled camera cable (approx. 5 cm; extends to approx. 50 cm, 3.5 mm stereo mini-plug both ends), and USB-A to USB-C charging cable (50 cm)
- Designed and manufactured in Japan
Specifications
- Element: Fixed-charge back plate, permanently polarised condenser
- Polar Pattern: Line + gradient
- Frequency Response: 60 to 20,000 Hz
- Low-Cut Filter: 160 Hz, 24 dB/octave
- Open Circuit Sensitivity: -28 dBV (maximum gain); -35 dBV (gain setting: 5)
- Gain Range: 37 dB (stepless)
- Maximum SPL: 126 dB SPL at 1 kHz, THD 3% (maximum gain); 132 dB SPL at 1 kHz, THD 3% (minimum gain)
- Dynamic Range: 109 dB at 1 kHz, THD 3% (maximum gain)
- Signal-to-Noise Ratio: 77 dB (1 kHz at 1 Pa, A-weighted, maximum gain)
- External Input: 3.5 mm (1/8") stereo mini-jack (mixed to mono); plug-in power 2.7 V
- Headphone Output Level: 100 mW (1 kHz, 32 ohm load); 75 mW (1 kHz, 16 ohm load)
- Headphone THD: < 1% (at 60 mW, 1 kHz, 32 ohm output)
- Compatible Headphone Impedance: Minimum 16 ohms
- Main Output: 3.5 mm (1/8") stereo mini-jack
- Power Supply: DC 3.85 V lithium-ion battery (USB rechargeable)
- Charging Time: Approx. 2.5 hours
- Operating Time: Max. approx. 24 hours (without headphone monitoring)
- Operating Temperature: 0°C to 40°C
- Storage Temperature: -10°C to 60°C, 10%–90% RH (without condensation)
- Dimensions: 127.1 mm long × 35 mm maximum body diameter × 82 mm height
- Weight: Approx. 155 g (5.5 oz)
Product Code: ATV-SG1