£x.xx

The PU-USB3-KIT is a USB 3.2 Gen1 extender set designed to extend signal from one USB host to multiple USB devices for up to 100 metres (328 feet).

The transmitter enables the extension from the USB-C host to a local USB device and across CAT cabling to the USB devices on the receiver. The transmitter can be powered by a connected host device such as a computer or laptop, without the need for an external power adaptor. The Type-A port can provide up to 5V/900mA (4.5W) power when the unit is active.

The receiver enables users to extend up to 4 USB 3.2 devices remotely, such as flash drives, keyboards, and USB cameras. The USB-C port supports 5V/3A power (with an adapter) and USB-A ports provide 5V/0.9A power to USB devices. The kit also supports a hotkey for convenient firmware update from the transmitter side for both TX and RX.

Features

• Supports USB 3.2 Gen1 with 1 × USB-C host port and 1 × USB-A device port
• Supports point-to-point transmission via CAT cabling
• Transmission up to 100 metres (328 feet)
• The transmitter can be powered by a connected host such as a computer or laptop
• The host can control multiple USB devices on both transmitter and receiver side
• Firmware update with hotkey from the transmitter, enabling remote firmware updates to the receiver
• Backward compatible with USB 2.0
• Receiver supports 4 × USB 3.2 Gen1 device ports

Specifications

TX:

• Inputs: 1 × USB-C [USB-C Host Port Proprietary Data]
• Outputs: 1 × RJ45 [USB Data Extension Proprietary Data]; 1 × USB Type-A [USB Device Port Proprietary Data]
• PSU: 12V/3A, USB Powered
• Dimensions: 60mm [W] × 25mm [H] × 95mm [D]
• Net Weight: 140g

RX:

• Inputs: 1 × RJ45 [USB Data Extension Proprietary Data]
• Outputs: 3 × USB Type-A [USB Device Port Proprietary Data]; 1 × USB-C [USB-C Device Port Proprietary Data]
• PSU: 12V/3A
• Dimensions: 128mm [W] × 25mm [H] × 75mm [D]
• Net Weight: 280g
• Gross Weight: 900g

Product Code: PU-USB3-KIT