£x.xx

The PUV-2606TX HDBaseT2 Transmitter has USB connectivity, audio embedding and all the features of HDBaseT2 plus the reverse PoH (RX powers TX) featured in all the PUV-2600 range along with its primary HDMI and analogue audio inputs.

The PUV-2606TX can send uncompressed audio/video along with Ethernet, USB, IR, and RS-232 over a single Cat.6/7 cable up to a distance of 100m. The HDMI input supports resolutions up to 4K@60Hz (4:2:0, 8-bit). The minijack 3.5mm stereo audio input may also be embedded into the HDBaseT output signal. Despite HDBaseT's 10.2Gbps bandwidth limitation, high bandwidth 4K UHD+ HDMI video sources, up to and including 4K@60Hz (4:2:0, 8-bit), are supported.

Whether paired with the standard PUV-2606RX or the more advanced matrix receiver, the PUV-2600RX, this transmitter has a total of 3 selectable USB host (Type-B/C) connections available, which provide access to 5 USB device (Type-A) ports, forming a highly flexible KVM extension configuration (Note: Only 1 USB host may be active at a time). Additionally, the USB Type-C input can provide power (up to 60W) to any connected device (only available when the unit is powered locally). All USB ports on the transmitter support up to USB 3.0 data transfer speeds.

Additional functionality such as advanced EDID management, HDCP management, and basic signal event automation (which can automatically send customised RS-232 or CEC commands to an external device) are also available via the webGUI or via control commands.

The PUV-2606TX can be powered locally with a 24V power supply or remotely via PoH (Power over HDBaseT) from a compatible PUV-2600 series HDBaseT receiver, allowing for greater flexibility in installations. It can be switched, configured, and controlled via front panel buttons, webGUI, Telnet, and RS-232.

Note: this listing is for the transmitter unit only — a compatible receiver is required to complete the link.

Features

• HDMI 2.0, DisplayPort 1.4, and DVI 1.0 compliant
• HDCP 1.x and 2.2 compliant
• 1 HDBaseT output
• Supports up to 4K UHD+ (18Gbps, 4K@60Hz 4:4:4, 8-bit) video input
• Supports Deep Colour input up to 12-bit
• Supports 10-bit and 12-bit HDR (High Dynamic Range) input
• HDBaseT output supports resolutions up to 4K@60Hz (4:2:0, 8-bit) with automatic down conversion to 1080p for any sources that exceed HDBaseT's bandwidth limitations, such as 4K@60Hz (4:4:4, 8-bit) or 4K@any (10/12-bit) sources
• Supported HDBaseT feature set: HD Video & Audio, PoH (PD), and Control Extension (Bi-directional IR/RS-232/USB)
• Supports pass-through of many audio formats including 8 channel LPCM, Bitstream, and HD Bitstream
• Analogue audio may be embedded to HDMI input
• EDID management with internal or external EDID options
• Basic signal event automation (via RS-232 or CEC)
• Supports optionally being powered via PoH from a compatible HDBaseT receiver
• Controllable via front panel button, WebGUI, Telnet, or RS-232

Specifications

• Inputs: 1x HDMI [2x HDMI Uncompressed AV and Data], 1x 3.5mm Stereo mini-jack [1x Analogue Stereo(L/R)], 1x Phoenix (3 pin) [1x Console port RS-232], 1x Phoenix (3 pin) [1x Bypass RS-232], 1x 3.5mm Stereo mini-jack [1x Infra Red Receiver], 1x RJ45 [1x IP Control Propriety Data], 1x USB 3 Type B [1x USB Power & Data]
• Outputs: 1x RJ45 [1x HDBaseT HDMI & Propriety Data], 1x 3.5mm Stereo mini-jack [1x Infra Red Emitter], 2x USB Type A [2x USB Propriety Data]
• POE PSU: PoH
• PSU: 24V/3.75A
• Dimensions (W × H × D): 231.5mm [W] x 25mm [H] x 108mm [D]
• Net Weight: 660g
• Gross Weight: 960g

Product Code: PUV-2606TX