£x.xx

The CYP SDV-C2-RX is a SDVoE receiver designed for high-quality, IP-routable AV extension over a 10G IP network with minimum latency. Using an ultra-light compression scheme (lossless for most content), it supports the extension of 4K audio and video streams alongside control and data signals. Advanced HDMI content including HDR, 10-bit colour, and multichannel HD Bitstream audio can be transmitted in pass-through mode. A single Cat.6A or better cable carries up to 100m point-to-point, while IR, RS-232, USB 2.0, and Ethernet signals can all be transmitted alongside the AV. Basic configuration is available via front panel buttons with an OSD, with expanded functionality available through an optional IP Master Controller or compatible control software.

Ideal For

Suited to commercial AV installations requiring scalable 4K distribution over 10-Gigabit network infrastructure, including environments where USB 2.0 extension, analogue audio insertion and extraction, and KVM-style operation are required alongside the video signal.

Features

• SDVoE AV over IP receiver supporting 4K@60 4:4:4
• HDMI 2.0 and DVI 1.0 compatible
• HDCP 2.2 and HDCP 1.x compliant
• Point-to-point extension up to 100m via Cat.6A or better cable
• Ultra-light compression, lossless for most content
• IP routable with minimum latency (requires optional IP Master Controller or control software)
• Supports independent breakaway A/V matrix switching, video wall generation, and multi-view compositing (requires optional IP Master Controller or control software)
• Supports pass-through of 10/12-bit HDR sources (Point-to-Point and Bypass modes only)
• Supports LPCM up to 8 channels, Bitstream and HD Bitstream audio pass-through from HDMI or DisplayPort sources
• Analogue stereo audio extension, insertion, and extraction (insertion and extraction require optional IP Master Controller or control software)
• IR, RS-232, USB 2.0, and Ethernet signal extension
• PoE powered (802.3at) when connected to a compatible 10GbE switch
• Basic configuration via front panel buttons with OSD

Specifications

• Inputs: 1 × RJ45 (SDVoE CAT HDMI & Proprietary Data), 1 × 3.5mm Stereo Mini-Jack (Analogue Stereo L/R), 1 × 3.5mm Stereo Mini-Jack (IR Receiver), 1 × Phoenix 3-Pin (RS-232), 1 × RJ45 (LAN Proprietary Data), 1 × USB Micro (Service Port)
• Outputs: 1 × HDMI (Uncompressed AV and Data), 2 × USB Type-A (Proprietary Data), 1 × 3.5mm Stereo Mini-Jack (Analogue Stereo L/R), 1 × 3.5mm Stereo Mini-Jack (IR Emitter)
• PoE: 802.3at
• Power Supply: 12V / 3A
• Dimensions (W × H × D): 231.5 × 25 × 108 mm
• Net Weight: 580g
• Gross Weight: 1.66kgGross Weight: 500g

Product Code: SDV-C2-RX