€x.xx

The CYP SDV-CS8 is a master controller and configurator for managing multiple SDVoE extenders on the same network. Using its Web GUI, transmitters, receivers and transceivers can be configured and channel routing defined, with routes switched via customised groups or pre-sets across multiple video zones. The unit supports the matrix, video wall and multiviewer modes of connected SDVoE extenders and, depending on the scaler mode, allows instant switching between selected video transmitters.

The status of all connected transmitter and receiver units — including IP address, subnet mask and extender status — is shown within the Web GUI, which can be accessed over a normal network connection or locally by connecting an HDMI display and a USB keyboard and mouse. A trigger input interface allows a remote control keypad or other trigger-supporting product to be added, enabling stored pre-sets to be activated at the press of a button. Standard control is available via Web GUI (remote or local), RS-232, Telnet, IR remote and triggers.

Ideal For

Controlling and configuring SDVoE AV over IP systems across multiple video zones, with trigger-based pre-set recall suited to lectern or tabletop installation in conference room and classroom environments.

Features

• Manages and configures multiple compatible SDVoE extenders through a single Web GUI
• Control over matrix, video wall and multiviewer modes using Web GUI pre-sets
• Rapid switching time between transmitters
• Definable display groups
• Web GUI clearly displays the status of all connected transmitters and receivers, including IP address and channel selection
• HDMI output displays the Web GUI and system status
• Dual LAN ports enable control over the local network as well as independent access to the controller, separate to the distribution network
• Supports the use of a USB mouse and keyboard for control of the Web GUI (optional)
• Can be powered directly by Power over Ethernet (PoE) when connected to an Ethernet switch that follows the 802.3af PoE standard
• Trigger control keypad support for simple single-button pre-set activation
• Standard control via Web GUI (remote or local), RS-232, Telnet, IR remote and triggers

Specifications

• Product Type: SDVoE 10G AV over IP Master Controller and Configurator
• Inputs: 2 × RJ45 (2 × Individual Network IP); 1 × Phoenix 3-Pin (RS-232); 1 × 3.5mm Stereo Mini-Jack (Infra Red Receiver); 1 × Phoenix 10-Pin (Trigger In ×8); 1 × USB Type A (Service Port, Proprietary Data)
• Outputs: 1 × HDMI (Uncompressed AV and Data)
• PoE Support: PoE (IEEE 802.3af)
• Power Supply: 5V / 2.6A
• Dimensions (W × H × D): 231.5 × 25 × 108 mm
• Net Weight: 640g
• Gross Weight: 1.3kg

Product Code: SDV-CS8