€x.xx

The Simply45 S45-B002 are professional-grade integrated strain relief boots designed to work seamlessly with Simply45 Pass-Through, PROSeries, and Standard RJ45 modular plugs. Engineered to the same width as the RJ45 connector body, these strain reliefs lock into the plug and boot during the crimping process in one easy step, delivering a clean, professional finish while significantly extending the lifespan of your network terminations.

Key Features

• Integrated crimp-in design for a one-step installation
  Unlike traditional slip-on boots, the S45-B002 strain reliefs lock directly into the RJ45 connector body and are crimped into place at the same time as the plug — saving time on every termination. The narrow design matches the exact width of the RJ45 plug body for a neat, integrated finish on every cable assembly.
• Prolongs the life of the termination
  Strain reliefs prevent excessive bending or twisting of the cable near the connector, protecting the internal wires from stress and damage. The snagless design also features an extended tab that shields the locking tab on the RJ45 plug from accidental snagging, helping to prevent broken tabs and loose connections over time.
• Maintains correct cable bend radius
  The boot is designed to maintain the manufacturer-recommended bend radius for Cat6 and Cat6a UTP cables, protecting signal integrity at the termination point and ensuring consistent network performance throughout the life of the installation.
• Trimmable for flexible cable OD compatibility
  The strain relief can be trimmed to accommodate different cable outer diameters up to a maximum of 7.0 mm (0.276 in), giving installers the flexibility to use these boots across a range of Cat6 and Cat6a UTP cable types and jacket ratings.
• Commercial UL94 V0 rated polycarbonate construction
  Manufactured from high-quality polycarbonate with a UL94 V0 commercial rating, suitable for use with CMP Plenum and LSZH-rated cables. UL and cUL Listed (E520614) for safety and installation compliance. Fully PoE and PoH rated for modern power-over-ethernet applications.
• Clear tint with red pin, wide-mouth resealable bag
  The clear tint with distinctive red pin makes identification quick and easy, while the wide-mouth resealable bag keeps all 100 strain reliefs organised, protected, and accessible throughout your installation.

Performance and Compliance

• Compatible with Simply45 Pass-Through, PROSeries, and Standard RJ45 modular plugs for Cat6 and Cat6a UTP cables.
• UL94 V0 Commercial Rated, suitable for Plenum, CMR, CM, and LSZH cable types.
• PoE / PoH rated for all modern power-over-ethernet applications.
• TAA compliant and California Proposition 65 (P65) compliant.
• UL and cUL Listed (E520614).
• Backed by a Lifetime Warranty.

Specifications

• Part Number: S45-B002
• Category: Cat6 / Cat6a UTP
• Compatible plug styles: Pass-Through, PROSeries, and Standard Modular Plugs
• Cable type: UTP (Unshielded)
• Max cable OD: 7.0 mm (0.276 in)
• Material: Polycarbonate, UL94 V0 Rated
• Colour: Clear Tint with Red Pin
• Packaging: Wide-mouth resealable bag
• Quantity: 100 pieces

The Simply45 S45-B002 strain relief boots are an easy and cost-effective way to improve the durability, appearance, and longevity of your Cat6 and Cat6a RJ45 terminations — all in one simple crimping step.

Product Code: S45-B002